HYDRO 2018 Gdansk: Selecting A Dredge For Your Reservoir Maintenance

Barrage du Ksob, M’Sila, Algeria with a DOP dredge 350

This week, I am here in Gdansk for a presentation on the HYDRO 2018 Conference1 and assist at the Damen booth at the corresponding exhibition. The paper and the presentation are already prepared and I am very excited to do the presentation, but I can’t wait till tomorrow and I like to share the story now, already. So, you, as my favourite audience, will have my personal spoiler after so many teasers have been floating around2,3,4.

General modes of siltation at the usual location in a reservoir

The thing is, dam maintenance and reservoir restoration is something already long on my attention list. Back already in 2008, I wrote a paper on this subject for the CEDA Dredging Days5. Over and over we’ve conveyed the message on various platforms, that dredging might be a viable solution for sedimentation problems in reservoirs. Usually, the solution by dam owners and operators is to flush, sluice or store the sediment. This looks horrible from a dredging perspective, but it is also to the environment. You either smother or starve the downstream river with sediment. As a right minded dredge enthusiast, you see many possibilities to dredge such a project. Immediately we can identify what dredge to use on which location for which purpose.

Selection of applicable dredges for reservoir dredging

If you are very close to the dam and the length of the discharge line allows it, you might even not need a dredge pump. (No wear parts!) It is a so called siphon dredge. But as soon as there is some further transport involved, either distance or uphill, you need a dredge like a cutter suction dredge or a DOP dredge. For even further discharge, you might employ a booster for increased discharge pressure. If the distance becomes very far, you might have to resort to grabs and barges.

Water injection dredging principle and example (this example would be too big for a common reservoir)

As an intermediate solution you might even consider using a water injection dredge. Usually the reservoir is in the mountains and a bottom gradient will be present, enabling the required gravity flow. The actual dredge should have created a silt trap where it can collect the inflowing material from the water injection dredge. Than it can handle the material as usual.

Alternative uses for the dredged sediment a) silt farming as fertile additive b) gravel extraction for concrete

Off course, the dredged sediment belongs to the river and the best thing would be to gradually release the sediment after the dam. But there might be conditions, where it is beneficial to extract the valuable fraction of the sediment and use it for agriculture or as aggregate in the construction industry.

Dredge selection diagram for reservoirs

We noticed, that it is often difficult to convey to dam owners and operators which dredge to select for which job. Sediment is seen as a liability and not as an asset and they rather neglect issues associated with the sediment. So, I made an attempt to have a plain and simple selection diagram. That is the core of my manuscript. But my objective is, that we will see many beautiful dredges contributing to a sustainable and viable operation of hydropower dams and reservoirs.

New DOP dredge family


  1. HYDRO 2018: Progress through partnerships, Hydropower and Dams
  2. LinkedIn Teaser, Saskia den Herder
  3. Damen: Spotlight on Hydro Power Dam Maintenance
  4. LinkedIn Teaser, Olivier Marcus
  5. Multi Functional Small Dredging Solution For Maintenance Of Deep Irrigation Reservoirs And Hydro Power Dams, CEDA

See also